Why is group mode not working on my Sony MZ-N707 OpenMG Jukebox NOTES on installing & operating CD Player?
If the group function (group mode/group skip mode) on your Sony CD Player isn't working, and you're trying to select program play, make sure to turn group mode on before selecting program play.
Why is the display window on my Sony MZ-N707 OpenMG Jukebox NOTES on installing & operating not normal?
If the display window on your Sony CD Player is not normal, it could be because the recorder was disconnected from the power source. Let the recorder sit for a while, or disconnect and reconnect the power source, then press any of the operation buttons.
What to do if my Sony MZ-N707 OpenMG Jukebox NOTES on installing & operating recorder does not work?
If your Sony CD Player recorder does not work or is performing poorly, there could be several reasons. Ensure audio sources are securely connected by disconnecting and reconnecting them. Check if the HOLD function is enabled ('HOLD' will appear on the display); if so, disable it by sliding the HOLD switch. Also, verify that the lid is firmly closed until it clicks. If these steps don't resolve the issue, consider other potential causes such as weak batteries (charge or replace them), incorrect battery insertion (reinsert correctly), or moisture condensation inside the recorder (remove the MD and let the recorder dry in a warm place). If you were recording digitally from a portable CD player, make sure you used the AC power adapter and disabled the anti-skip function. Also make sure that yo...
General| PC Connectivity | USB |
|---|---|
| Model | MZ-N707 |
| Recording Format | ATRAC |
| Playback Format | ATRAC |
| Power Source | AC Adapter |
| Output | Headphones |
| Category | MiniDisc Player |
| Type | MiniDisc Player/Recorder |
Identifies and explains the various buttons and ports on the MiniDisc recorder unit.
Instructions for inserting the rechargeable battery into the recorder.
Step-by-step guide to charge the rechargeable battery using the AC power adaptor.
Details on connecting the recorder to audio sources and power.
Details the steps to initiate the recording process using synchro-recording.
Instructions for installing essential software and drivers for computer transfer.
Details on connecting the recorder to the computer via USB and transferring music.
Guides the user on how to properly insert a MiniDisc into the recorder for playback.
Instructions on how to start playback, adjust volume, and stop playback.
Step-by-step instructions for physically installing the recorder in a car.
Provides solutions for common problems encountered with the recorder.
To Next Page
