To Next PageTo Next PageWhat to do if the playback picture does not appear on the Sony N71 VCR screen?
Ensure that the TV is set to the correct channel for the VCR. If you're using a monitor, set it to video input.
What to do if the channels on the Sony N71 cannot be changed?
Make sure the CABLE BOX CONTROL option is set to OFF.
Why does "ACS" flash in the display window of my Sony N71 VCR?
The VCR is searching for a time signal. If channels in your area do not carry time signals, set the clock manually.
How to fix the picture rolling vertically during picture search on a Sony N71 VCR?
Adjust the vertical hold control on the TV or monitor.
What to do if the Sony N71 power is on but the VCR does not operate?
If moisture condensation has occurred, turn the power off, unplug the AC power cord, and let the VCR dry for over three hours.
What to do if the remote commander does not function with my Sony N71 VCR?
Make sure you are pointing the remote commander at the remote sensor on the VCR. If the batteries are weak, replace them with new ones. Ensure the •TV / VIDEO switch is set correctly. If you are not using Control S, make sure that both miniplugs are disconnected.
How to fix a Sony N71 when a TV program does not appear on the TV screen?
First, ensure that the TV is set to the correct channel for the VCR. If you are using a monitor, set it to video input. Also, select the correct source using the INPUT SELECT or CH +/– buttons. Select a channel number when recording TV programs; select “L1” or “L2” when recording from other equipment.
What to do if the timer does not operate on my Sony VCR?
Check the following: * Ensure the clock is set. * Make sure a tape has been inserted. * Verify the safety tab has not been removed. * Confirm the tape is not at its end. * Ensure a program has been set for timer recording. * Make sure your timer settings are past the current time. * Check that the cable box is turned on. If the VCR was disconnected from the wall outlet for more than one hour, reset the clock and timer. If you're using a Cable Mouse (SLV-N81 only), ensure the CABLE BOX CONTROL option is set to ON. As a last resort, turn the power off and unplug the AC power cord.
Why is the picture not clear on my Sony N71 VCR?
The video heads may be dirty, so clean them using a Sony T-25CLD or T-25CLDR video head cleaning cassette. Alternatively, try adjusting the tracking with the TRACKING +/– buttons. If the problem persists, the video heads may need replacement; consult your local Sony dealer.
Safety warning regarding polarized AC plugs and extension cord usage to prevent blade exposure.
FCC compliance and interference guidelines specific to users in the USA.
Ensures operation only from the indicated power source type for safety.
Guidelines for maintaining adequate air circulation to prevent overheating.
Instructions on when to refer servicing to qualified personnel and safety precautions.
Instructions for unpacking the VCR and its accessories.
Guidance on various connection options for the VCR and TV setup.
Procedures for setting the VCR clock using Auto Clock Set or Manual Set.
Step-by-step guide on inserting a tape and playing it.
Instructions for recording TV programs, including tape speed selection.
Manual process for setting timer recordings for programs.
Details on playing tapes at different speeds and searching for specific points.
Procedures for viewing, modifying, or deleting programmed timer settings.
Methods for adjusting picture quality, including tracking and Reality Regenerator.
Details on RF unit setup, antenna connectors, and mixers for optimal signal.
Common issues and their solutions for power, clock, playback, and recording problems.
Technical specifications including format, power, dimensions, and inputs/outputs.
General