83
Recording Menu
Recording
Item Sub-item setting Description
S&Q Motion
Slow & Quick
Motion mode
settings (page 46)
Setting
On / Off
Turns Slow & Quick Motion on/off.
When set to On, the following functions are disabled.
• Auto iris
• Auto focus
High Frame Rate Mode
Off / Full Scan
Enables higher speed imaging than 60P.
Off:
Higher speed imaging than 60P is disabled.
Full Scan:
Enables high-speed imaging at Super 35 frame size.
Frame Rate
Up to 240fps
Sets the frame rate for Slow & Quick Motion shooting.
Note
The initial value varies depending on the Codec, Country,
Video Format, and RAW Output Format settings.
Picture Cache
Rec
Picture cache
recording mode
settings (page 47)
Setting
On / Off
Turns the picture cache recording function on/off.
Cache Rec Time
0-2sec / 2-4sec / 4-6sec /
6-8sec / 8-10sec / 10-12sec /
12-14sec / 13-15sec
Sets the picture cache recording time, when Picture Cache Rec
is set to On.
Simul Rec
Simultaneous
recording settings
(page 38)
Setting
On / Off
Turns the simultaneous recording function on/off and sets the
recording destination media.
Rec Button Set
“Rec Button [SlotA SlotB]
Handle Rec Button [SlotA
SlotB]” / “Rec Button [SlotA]
Handle Rec Button [SlotB]” /
“Rec Button [SlotB] Handle
Rec Button [SlotA]”
Assigns the record buttons used to control each recording
media.
SDI/HDMI Rec
Control
SDI/HDMI
recording control
settings
Setting
On / Off
Turns recording start/stop control for an external connected
device, using SDI/HDMI signals, on/off.
When different buttons are assigned using Rec Button Set, the
recording control signal follows the recording state of slot A.
To Next Page
