90
RAW Output Format
• For NTSC systems:
When Codec >Select is set to an
item that includes RAW.
4096×2160 59.94P
4096×2160 29.97P
4096×2160 23.98P
2048×1080 59.94P
2048×1080 29.97P
2048×1080 23.98P
• For PAL systems:
When Codec >Select is set to an
item that includes RAW.
4096×2160 50P
4096×2160 25P
2048×1080 50P
2048×1080 25P
Sets the recording format for an external RAW recorder.
Genlock
Genlock settings
Reference
Internal / External (HD) /
External (SD)
Displays the genlock state. It displays the signal type if
genlock is applied.
Internal: External genlock not applied.
External (HD): Genlock to HD signal.
External (SD): Genlock to SD signal.
Assignable
Button
Assignable button
settings
<1> to <6>
Off / Marker / Zebra / Peaking /
Video Signal Monitor / Focus
Magnifier x4/x8 / Focus Magnifier
x4 / Focus Magnifier x8 / VF
Mode / IRIS / Push Auto Iris /
AGC / Push AGC / SHUTTER /
Auto Exposure Level / Spotlight /
Backlight / ATW / ATW Hold /
Push AF/Focus Hold / SteadyShot
/ Color Bars / User Menu / Rec
Lamp / S&Q Motion / Picture
Cache Rec / Rec Review /
Thumbnail / Shot Mark1 / Shot
Mark2 / Clip Flag OK / Clip Flag
NG / Clip Flag Keep /
DURATION/TC/U-BIT / High/
Low Key
Assigns functions to assignable buttons.
Marker:
Turns the marker function on/off.
Zebra:
Turns the Zebra function on/off.
Peaking:
Turns the peaking function on/off.
Video Signal Monitor:
Switches the video signal display (histogram, etc.).
Focus Magnifier x4/x8:
Focus Magnifier x4:
Focus Magnifier x8:
Turns the focus magnifier function on/off.
VF Mode:
Switches the viewfinder display between color and B&W.
IRIS:
Switches the iris function between Auto and Manual.
Push Auto Iris:
Enables the auto iris function while the button is pressed.
AGC:
Turns the AGC function on/off.
System
Item Sub-item setting Description
To Next Page
