Sony RM-E300 - Using Recorders without CONTROL Connectors

When Using a Sony Recorder without the CONTROL L or
CONTROL S Connector
Recorder :
If the recorder can be operated with the infrared remote
control unit, the recorder can also be operated with this unit.
The tape transport of a Beta format, 8 mm format and VHS
format VCR can be controlled with this unit.
Set the switches on the rear panel as follows.
When a Beta or ED Beta format VCR is used for the recorder
=» VTR1
VTR2
VTRI 1 VTRS When an 8 mm format VCR/video camera recorder is used for the
recorder
=» VTR2
COMMAND MODE
When a VHS format VCR is used for the recorder
=» VIR3
Refer to the following “Note on the COMMAND MODE selector’.
a ea |
Set to A.
PAUSE MODE
aT o
®® @O08) OOOO) «
SONY _-MEMORY
Set to SONY.
13