Basic Operations
45
US
Recording TV programs
Recording TV programs
Before you start ...
• Turn on the DVD-VCR and your TV.
When using a cable box, turn it on.
• Set the TV to video input so that the signal
from the player appears on the TV screen.
•Set TV
/ DVD·VIDEO switch to
DVD·VIDEO
on the remote.
• Make sure the tape is longer than the total
recording time.
1
Press SELECT VIDEO to control the VCR.
2
Insert a tape with its safety tab in place.
3
Press CH +/– to select the channel or line input video source you want to
record.
You can select a video source from the LINE IN 1 or LINE-2 IN jacks using
the INPUT SELECT button. “L1” or “L2” appears in the display window.
CH +/–
z REC
SP/EP
DISPLAY
TV/VIDEO
INPUT SELECT
x STOP
H PLAY
Z
SELECT VIDEO
TV
/ DVD·VIDEO
switch
continued
To Next Page
Loading...
