Sony SPP-A1071 User Manual

SERVICE MANUAL US Model
SPP-A1070
Canadian Model
SPP-A1071
SPECIFICATIONS
SPP-A1070/A1071
Ver 1.1 2001.12
9-873-145-12 Sony Corporation
2001L0500-1 Personal Audio Company
C 2001.12 Published by Sony Engineering Corporation
CORDLESS TELEPHONE WITH ANSWERING SYSTEM
Photo: SPP-A1070
General
Operating frequency
Base unit: 902 - 905 MHz (310µW)
Hand set: 925 - 928 MHz (400µW)
Operating channel
30 channels
Dial signal
Tone, 10 PPS (pulse) selectable
Supplied accessories
AC power adaptor AC-T122
Telephone line cord
Rechargeable battery pack BP-T18
Belt clip
Wall bracket
Handset
Power source
Rechargeable battery pack BP-T18
Battery life
Standby: Approx. 7 days
Talk: Approx. 7 hours
Dimensions
Approx. 2
1
⁄4 x 1
7
⁄8 x 7
1
⁄4 inches (w/h/d),
antenna excluded
(approx. 55 x 47 x 183 mm)
Antenna: Approx. 1
3
⁄8 inches
(approx. 34 mm)
Mass
Approx. 7.7 oz (approx. 220 g), battery
included
Base unit
Power source
DC 9V from AC power adaptor AC-T122
Battery charging time
Approx. 12 hours
Dimensions
Approx. 6
3
⁄4 x 2
1
⁄4 x 7
1
⁄2 inches (w/h/d),
antenna excluded
(approx. 171 x 57 x 189 mm)
Antenna: Approx. 6
1
⁄ 8 inches
(approx. 153 mm)
Mass
Approx. 15 oz (approx. 412 g), wall bracket
excluded
Answering machine
Maximum recording time
Approx. 15 minutes, using incorporated IC
Greeting message
Up to 90 seconds per each
Incoming Memo message
Up to 4 minutes per message
Design and specifications are subject to
change without notice.

Sony SPP-A1071 Specifications

General

Model	SPP-A1071
Category	Cell Phone
Status	Discontinued
SIM	Mini-SIM
Loudspeaker	Yes
3.5mm jack	No
Radio	No
Games	Yes
Ringtones	Polyphonic
Alert types	Vibration; Downloadable polyphonic ringtones
Messaging	SMS

Summary

SPECIFICATIONS

Base Unit Specifications

Handset Specifications

Answering Machine Specifications

SERVICING NOTES

EEPROM Replacement Note

Note on replacing EEPROM and pairing U6/U4 on base and handset boards.

Prior Check for Servicing

Procedure to check handset or base unit compatibility in test mode.

DISASSEMBLY

Handset Rear Assembly

DISASSEMBLY (Continued)

Handset Front Assembly

Base Bottom

Hand Main Board

TEST MODE

Entering Manual Test Mode

Procedures for entering test mode on both base unit and handset.

Test Mode Operations

Key operations and indications within the test mode for base and handset.

Data Link and Security Synchronization

Data link format and procedures for synchronizing security codes.

TEST MODE (Continued)

Key Definitions

Explains the function of each key within the test mode.

Data Link Format

Security Code Synchronization

Procedures for synchronizing security codes between handset and base unit.

DIAGRAMS

Block Diagram - Base Unit

Functional block diagram of the base unit's electronic sections.

DIAGRAMS (Continued)

Block Diagram - Handset

Functional block diagram of the handset's electronic sections.

IC Block Diagrams

Detailed IC block diagrams for key components on base and handset boards.

SCHEMATIC DIAGRAMS

Base Main Board Schematic

Schematic diagram for the base main board showing electronic circuit connections.

SCHEMATIC DIAGRAMS (Continued)

Hand Main Board Schematic

IC PIN FUNCTION DESCRIPTION

Base Main Board IC Pins

Description of pin functions for ICs on the base main board.

Hand Main Board IC Pins