Help Guide
Multi Channel AV Receiver
STR-AZ1000ES
No image is output to the TV from the connected HDMI device when the unit is in standby mode.
When the unit enters standby mode, the image from the last HDMI device selected before you turned off the unit is displayed. If no
image is output to the TV, perform the following operations.
Turn on the unit to select the HDMI device from which you want to enjoy content.
Make sure [Standby Through] is set to [Auto] or [On] in the [HDMI Settings] menu.
Related Topic
Enjoying content of a connected device without turning on the unit (Standby Through)
5-037-020-11(1) Copyright 2022 Sony Corporation
To Next Page
