Sony STR-DA4600ES - Page 130

130
GB
The following options are available in each menu.
“xx…” in the table signifies the parameter for each item.
Menu list (in the display window)
Menu Item Parameter Initial
setting
Auto Calibration
<AUTO CAL>
A.CAL START
(Auto Calibration Start)
5 4 3 2 1
TONE
T.S.P.
WOOFER
COMPLETE RETRY, SAVE EXIT, WRN CHECK,
PHASE INFO, DIST. INFO, LEVEL
INFO, EXIT
SAVE EXIT
W-xxx:4Y
(Warnig code)
FL, FR, CNT, SL, SR, SBR, SBL, SW,
LH, RH : 0, 1, 2, 3, 4
NO WARN
(No Warning)
xxx: xxx
(Phase Information)
FL, FR, CNT, SL, SR, SBR, SBL, SW,
LH, RH : OUT, IN
xxx: xxx
(Distance Information)
FL, FR, CNT, SL, SR, SBR, SBL, SW,
LH, RH
xxx: xxxx
(Level Information)
FL, FR, CNT, SL, SR, SBR, SBL, SW
LH, RH
E-xx :3Y
(Error code)
F, SR, SB : 0, 1, 2, 3, 4
RETRY? xxx YES, NO YES
CANCEL
CAL TYPE
(Calibration Type)
FULL FLAT, ENGINEER,
FRONT REF, OFF
FULL
FLAT
A.P.M. A.P.M. AUTO, A.P.M. OFF A.P.M.
AUTO
POSITION POS.1, POS.2, POS.3 POS.1
NAME IN
(Nameing Input)
For reference on this function, see “To
name the Seating Position” (page 111).