Notes
• Insert the wireless transmitter with the S-AIR logo
facing up.
• Insert the wireless transmitter so that the T marks
are aligned.
• Do not insert other than the wireless transmitter
into the EZW-
TI
00
slot.
3 Use the screws that you removed from
step 1 to fasten the wireless
transmitter.
Note
Do not use other screws to fasten the wireless
transmitter.
To insert the wireless
transceiver into the S-AIR sub
unit
For details on installing the wireless
transceiver into surround amplifier and S-AIR
receiver, refer to the operating instructions
supplied with the surround amplifier and
S-AIR receiver.
82
US
When you match the ID
of
the S-AIR main
unit and the S-AIR sub unit, you can establish
sound transmission. You can use multiple
S-AIR main unit by setting a different ID for
each unit.
AMP
(-~~
MENU
8,
+1+1.1.
To set the
10
of the S-AIR main
unit
1 Press AMP MENU.
"I-LEVEL"
appears on the display.
2 Press
+1+
repeatedly to select
"9- S-AIR".
3 Press 8 or + to enter the menu.
4 Press
+1+
repeatedly to select
"10
SETUP".
5 Press 8
or
+ to enter the parameter.
6 Press
+1+
repeatedly to select the
10
(A, 8
or
C) you want, then press
8.
To exit the menu
Press AMP MENU.
To Next Page
Loading...
