49
US
Tuner Operations
1 Select “Listen” from the home
menu, then press .
2 Select “FM” or “AM” from the
menu, then press .
The FM or AM menu list appears on
the TV screen.
FM/AM screen
You can select and operate each item
on the screen by pressing V/v/B/b and
.
1 Frequency indication (page 49)
2 Preset station list (page 50)
Select “Tuning +” or “Tuning –”, then
press .
Select “Tuning +” to scan from lower to
higher frequency stations, select
“Tuning –” to scan from higher to lower
stations. The receiver stops scanning
whenever a station is received.
In case of poor FM stereo
reception
1
Tune in the station you want to listen
to using Auto Tuning, Direct Tuning
(page 49), or select the preset
station you want (page 50).
2 Press OPTIONS.
3 Select “FM Mode”, then press .
4 Select “Mono”, then press .
You can enter the frequency of a station
directly by using the numeric buttons.
1 Press D.TUNING.
2 Hold down SHIFT, then press the
numeric buttons to enter the
frequency, then press .
Example 1: FM 102.50 MHz
Select 1
b 0 b 2 b 5
Example 2: AM 1,350 kHz
Select 1
b 3 b 5 b 0
Adjust the direction of the AM loop antenna
(aerial) for optimum reception upon tuning
to an AM station.
V/v/b,
HOME
OPTIONS
SHIFT
Numeric
buttons
D.TUNING
Tuning to a station
automatically (Auto
Tuning)
Tuning to a station
directly (Direct Tuning)
Tip
To Next Page
Loading...
