Selecting a Sound Field
Use the buttons on the front panel to operate the following modes
AUTO FORMAT DECODING Automatically detects tbe type of audio signal being You can use this mode as a reference. Set
(Press the A.ED. button) input (Dolby Digital, DTS, Dolby Pro Logic, o1"standard the equalizer to OFF while using this mode
2 channel stereo) and performs tbe proper decoding if to bear the source sound exactly as it was
necessary. This mode presents the sound as it was recorded.
recorded/encoded, without adding any effects.
2 CHANNEL OntI)UtS the sound flora the flont lef'. and right This allows you to play any source using
(Press the 2CH button) speakers only. Standard two channel (stereo) sources only the fl'ont left and right speakers.
completely bypass the sound field processing. Multi
channel surround fin'mats are downmixed to two
channels.
ANALOG DIRECT The analog input signal is not digitally processed. Only This mode is suitable for the enjoyment of
(Press the ANALOG DIRECT vohlme control and the balance between the fl'ont left high quality analog audio sources.
button) and fl'ont rigbt speakers can be adjusted.
.a,
O
5'
_D
_n
e,
e,
0
Note
No sound is outI)Ot fl'om the stlb woofer when the 2 CHANNEL mode is selected. To listen to two channel (stereo) sources rising the flont
left and right speakers and a sub woofer, use the AUTO FORMAT DECODING n-lode.
34
To Next Page
Loading...
