Unpacking
Check that you received the fffllowing items with the unit:
FM wire antenna (1)
AM loop antenna (1)
Audio/video/control S connecting cord (1)
Control S connecting cord (1)
Remote coimnander RM-LJ304 (reinote) (1)
R6 (size AA) batteries (3)
STR V444ES only
• Remote commander RM-US104 (remote) (1)
• R6 (size-AA) batteries (2)
Insert batteries with tile + and properly oriented in the
battery compartment. When using tile remote, point it at
the remote sensor R_g on tile receiver
For details, refer to the operating instructions supplied
with your remote.
"_° Whento replacebatteries
Under normal conditions, the batteries should last for about
3 months (alkaline batteries) or 2 months (manganese batteries).
When the remote no longer operates the receiver, replace all
batteries with new ones.
Notes
• Do not leave the remote in an extremely hot or humid place.
• Do not use a new batte W with an oM one.
• Do not expose the remote sensor to direct stmlight or lighting
apparatuses. Doing so may cause a mall\ruction.
• If you don't use the remote fur an extended period of time,
remove the batteries to avoid possible damage fl'om battery
leakage and corrosion.
• The remote RM LJ304 is designed for use with alkaline
batteries only. Do not use a combination of difl'erent batte W
types.
• Turn off tire power to all coinponents [)eft)re making
any connections.
• Do not connect the AC power cord until all of tire
connections are conlpleted.
• Be sure to make connections firmly to avoid hum and
noise.
• When connecting an audio/video cord, be sure to
match tire color-coded pins to the appropriate jacks on
the components: yellow (video) to yelk)w; white (left,
audio) to white; and red (right, audio) to red.
To Next Page
Loading...
