Playback24
EN
Useful Playback Functions
The AVLS* function is
operational when using the
headphones during
playback or in the recording
monitor mode.
The AVLS function keeps
down the maximum volume
to prevent excessive sound
from harming your ears.
To PHONES/LINE
OUT
PHONES (AVLS)/LINE OUT
* Auto Volume Limiter
System
Note
The sound may be warped
and distorted at times
especially during enhanced
bass segments when the
AVLS function is operating.
In this case, turn down the
volume.
Using AVLS function
Set the PHONES (AVLS)/LINE OUT switch to 2
AVLS OFF or ON when hearing the playback or
recording monitor sound with the headpnones. The
AVLS function operates when set to ON.
AVLS switch Volume and display
ON The volume is restricted at a
designated level.
“ ” appears followed by
“ ” when the VOLUME button is
pressed. When the volume is at
maximum level, “ ” flashes.
OFF The volume is set to normal volume
control.
Each time you press the VOLUME
buttons, the level of volume changes
accordingly and “ ” appears.
ON
OFF
AVLS
2
To Next Page
Loading...
