5
Press A+ or V- to select AUTO PROGRAM.
(R)
Press RETURN.
RETURN
SET UP
CABLE: ON
,AUTO PROGRAM
CH ERASEIADD
CH CAPTION/GUIDE
S VIDEO
_MENU
Use €1_ ExitW
"AUTO PROGRAM" appears on the screen and receivable
channels (other than the channels already preset) are preset in
numerical sequence. The channels previously preset will not remain
in the TV's memory.
When no more channels can be found, the programming stops and
the lowest numbered channel is displayed.
Receivable channels for this TV
VHF: 2- 13
UHF: 14 - 69
. Cable: 1 - 125
To select TV channels without
presetting
Press 0 - 9 and ENTER.
To return to the normal screen
Press MENU.
To erase unnecessary channels, or to add
channels that could not be preset
automatically because their signal was too
weak, foflow the steps in "Erasing
Unnecessary Channels- CHANNEL ERASE"
(pp. 20-21) and "Presetting Only Desired
Channels - CHANNEL ADD" (p. 22).
=o
==
Chapter 1: Setting Up 1 9
To Next Page
Loading...
