Sony Trinitron KV-20FV10 - Connecting External Equipment; Connecting a VCR to Your TV

User Guide
Connecting
Additional
Equipment
TV and VCR
TV
VIDEO IN
3
(Optional
connection)
1 Connect
the coaxial cable
from your
TV antenna or
cable
TV to
the IN
jack on
your VCR.
2 Connect a
coaxial cable (not
supplied)
from the
OUT jack
on your
VCR to the
VHF/UHF IN
jack on the TV.
£d
To watch video
programs from
your VCR,
tune your TV to
channel 3
or
4
(as
set on
the rear of your VCR).
(Optional
connection)
3
If your VCR is
equipped
with video inputs,
for
better
picture
quality
you
should connect
A/ V cables
from AUDIO
and
VIDEO
OUT on
your VCR to
AUDIO/
VIDEO IN on
your TV. You
can
use the
Td
0
button to
switch
between the TV
and VCR
inputs.
For optimum
picture quality, use S
VIDEO
instead of the
yellow
A/V cable.
S
VIDEO does not
provide sound,
the audio
cables must
still be
connected.
4