EasyManua.ls Logo

Sony UTX-B1 - Specifications

Sony UTX-B1
135 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32
Specifications
Specifications
Transmitter (UTX-B1)
Oscillator type
Crystal-controlled PLL synthesizer
Carrier frequencies
Model available in USA: 758 to
806 MHz
Model available in Europe: 798 to
862 MHz
Model available in Australia: 792
to 806 MHz
Operating frequency band
Model available in USA and
Europe: 24 MHz BW
Model available in Australia: 14
MHz BW
Pre-emphasis
50 µs
Frequency characteristics
50 Hz to 18 kHz
Signal-to-noise ratio
60 dB or more
Tone signal
32 kHz
Attenuation
0 to 21 dB, in 3-dB steps
Display
Channel, frequency, audio level,
RF level, accumulated battery
use time
Power requirements
3.0 V DC (two LR6/AA size
alkaline batteries)
Battery life
Approx. 6 hours (measured with
two Sony LR6/AA size alkaline
batteries at 25°C (77°F), with
output power of 30 mW)
Antenna
1/4
λ wave length wire
Audio input connector
3.5-mm dia. mini jack
Audio input level
–60 dBV to –39 dBV
RF output level
30 mW/5 mW selectable
Reference deviation
±5 kHz
Distortion
1.0% or less
Indicator
Power on
Dimensions
63 × 100 × 27 mm (2
1
/2 × 4 × 1
1
/
8
inches) (w/h/d) (excluding the
antennas)
Mass Approx. 140 g (5 oz) including
batteries
Tuner (URX-M1)
Type of reception
Space diversity
Oscillator type
Crystal-controlled PLL synthesizer
Reception frequencies

Table of Contents

Other manuals for Sony UTX-B1

Related product manuals