Sony VPL-CW255 - Page 22

22
The INPUT SETTING Menu
Aspect
VPL-CX235
*1: If you select “Normal,” the image is
projected in the same resolution as the
input signal without changing the aspect
ratio of the original image.
*2: If you select “Full2,” the image is projected
to fit the projected image size, regardless
of the aspect ratio of the image.
*3: Depending on the input signal, the
projected image may be projected as
illustrated below. In this a case, select
“16:9.”
*4: Depending on the input signal, the image
may be projected as illustrated below. In
this a case, select “Zoom.”
Input signal Recommended
setting value and
projected image
Computer signal
(4:3) (Full1)
*1
(16:9) (Full1)
*1 *2
(16:10) (Full1)
*1 *2
Video signal
(4:3) (4:3)
*3
(16:9) (16:9)
*4