25
Selecting the Menu Language
Convenient Functions
B Convenient Functions
Selecting the Menu
Language
You can select one of seventeen languages
for displaying the menu and other on-screen
displays. The factory setting is English.
To change the menu language, proceed as
follows:
1 Plug the AC power cord into a wall
outlet.
2 Press the ?/1 key to turn on the
projector.
3 Press the MENU key.
The menu appears.
The menu currently selected is shown as
a yellow button.
4 Press the v or V key to select the
MENU SETTING menu, then press
the B or ENTER key.
The selected menu appears.
5 Press the v or V key to select
“Language,” then press the B or
ENTER key.
6 Press the v, B, b or V key to select a
language, then press the ENTER key.
The menu changes to the selected
language.
To clear the menu
Press the MENU key.
The menu disappears automatically if a key
is not pressed for one minute.
1,2
Rear remote
control detector
To Next Page
Loading...
