Sony Walkman NW-E403 - Setting the Volume Using the Preset Volume Function (Volume Mode); Setting a Volume Level for Preset Mode (Preset Volume)

33
Adjusting the settings of your Network Walkman
2 Rotate the Shuttle switch to select
“AVLS>” and press the Nx
button to confirm.
AVLS ON
AVLS OFF
3 Rotate the Shuttle switch to select
“AVLS ON” and press the Nx
button to confirm.
The volume is kept at a moderate level.
To change the setting to “OFF”
Select “AVLS OFF” in step 3.
To cancel the Menu mode
Press the SEARCH/MENU button to return the
screen to the previous stage. Press repeatedly to exit
menu mode.
z Tip
“AVLS” is displayed by pressing the VOL +/–
button if the AVLS set to “ON”.
Setting the volume
using the preset
volume function
(Volume Mode)
There are two modes to adjust the volume
level.
Manual Volume:
Press the VOL +/– button to adjust the
volume level from 0 to 31.
Preset Volume:
Press the VOL +/– button to set the
volume level to any of 3 preset levels:
Low, Mid, or High.
Setting a volume level for
preset mode (Preset
Volume)
1 Press and hold the SEARCH/
MENU button for half a second.
The menu screen is displayed.
Repeat Mode
Sound
Volume Mode
Nx button
SEARCH/
MENU button
Shuttle switch
to > to .
VOL +/– button
continued