Sony Walkman NW-E403 - Memory Formatting and USB Settings

37
Other functions
B Other functions
Formatting
memory (Format)
You can use your Network Walkman to
format the built-in flash memory.
If memory is formatted, all data previously
stored in the memory will be erased. Be sure
to verify the data stored in the memory prior
to formatting.
1 Press and hold the SEARCH/
MENU button for half a second in
stop mode.
The menu screen is displayed.
Repeat Mode
Sound
Volume Mode
2 Rotate the Shuttle switch to select
“Advanced Menu>”, and press the
Nx button to confirm.
3 Rotate the Shuttle switch to select
“Format>” and press the Nx
button to confirm.
Format OK?
OK
Cancel
4 Rotate the Shuttle switch to select
“OK” and press the Nx button to
confirm.
“Formatting...” blinks and start
formatting.
When formatting is complete,
“Complete” is displayed.
To cancel the Menu mode
Press the SEARCH/MENU button to return the
screen to the previous stage. Press repeatedly to exit
menu mode.
To cancel formatting
Rotate the Shuttle switch to select “Cancel” and
press the Nx button to confirm in step 4.
Note
You cannot format memory while playing music.
Nx button
SEARCH/
MENU button
Shuttle switch
to >
to .