The CD Player
The CD Player 17
Creating your
own program
(Program Play)
While listening to the CD, you can select
the track you want and arrange the
playing order of up to 20 tracks on a CD.
1 Press p on the CD section.
"Cd" appears in the display.
2 Press MODE until “PGM” appears in the display.
3 Press the number buttons to select the track you
want to program.
Repeat this step.
4 Press ( on the CD section to start program play.
Tip
If you made a mistake,
press CANCEL and re-
enter the track number
by pressing the number
buttons.
Note
When you program a
track from the CD
having more than 20
tracks:
If you program a track
whose track number is
more than 20, “- -:- -” is
displayed instead of the
total programmed time.
Track number
Playing order
Total programmed time
p
MODE
Number
buttons
(
On the player
1 Press p on the CD
section.
2 Press MODE•MONO/
ST ISS to select “PGM”.
3 Press = or + to
select the track that you
want to program,
and press ENTER•
MEMORY CHECK.
Repeat this step.
4 Press ^.
continued
To Next Page
Loading...
Need help?
General
