Basic Operations10
Recording on a tape
Connect the supplied AC power cord (see page 34). To
record on a MiniDisc or DAT recorder, connect the
component (see page 36).
1 Press 6 PUSH OPEN/CLOSE to
open the tape compartment, and
insert a blank tape. Use TYPE I
(normal) tape only.
Press 6 PUSH OPEN/CLOSE
again to close the compartment.
2 Select the program source you
want to record.
To record from the CD player:
Insert a CD (see page 4) and press
p on the CD section.
To record from the radio:
Tune in the station you want (see
page 6).
31
With the side you want
to record on facing up
Display
î
To Next Page
Loading...
