Sony ZS-D50 Operating Instructions (primary manual) - Listening to the radio

Basic Operations6
Listening to the radio
Connect the supplied AC power cord (see page 34).
1 Press RADIO BAND until the
band you want appears in the
display (direct power-on).
2 Hold down TUNING TIME SET
+ or – (TUNE + or – on the
remote) until the frequency digits
begin to change in the display.
The player automatically scans
the radio frequencies and stops
when it finds a clear station.
If you cannot tune in a station,
press TUNING TIME SET + or –
repeatedly until you tune in the
station you want.
Display
21
Indicates an FM
stereo broadcast.