The Timer 29
The Timer
STANDBY
TIMER
Before you begin, make sure the t (clock) indication is
not lit in the display. If it is lit, press STANDBY.
1 Prepare the music source you want to play.
Source Do this
C d Insert a CD.
RAdIO Tune in a station.
TAPE Insert a tape.
LINE Turn on the equipment connected to
LINE IN.
2 Press TIMER to display the t indication.
Do the following operations by checking the
display.
3 Press TUNING TIME SET + or – until the music
source you want to play (“Cd”, “TAPE”, “RAdIO”
or “LINE”) appears in the display, and press
ENTER•MEMORY CHECK.
Waking up to
music
You can wake up to music or a
radio program at a preset time.
Make sure you have set the clock
(“Setting the clock” on page 28).
ENTER
MEMORY
CHECK
continued
TUNING TIME SET +, –
To Next Page
Loading...
Need help?
General
