Setting Up38
Listening through the speakers of other audio
equipment
1 Connect the LINE OUT jack of this player with the
analog line input jack of the amplifier using the
audio connecting cable (not supplied) .
2 Turn on the power of this player and the amplifier
and start playing sound on this player.
Amplifier
to analog line
input jack
Audio connecting
cable RK-G129HG
(1.5 m) (not supplied)
Rear panel of this
player
to LINE OUT
jack
Notes
• As long as “Cd”
appears in the display,
the optical digital
output jack is in
operation and the jack
lights even if the CD is
in stop mode.
• If you play a CD-ROM
that is not for audio
use, noise may be
heard.
Connecting optional components (continued)
To Next Page
Loading...
