Sorel STDC V3 - System Maintenance; Annual Controller Maintenance

47
Caution
In the course of the general annual maintenance of your heating system you
should also have the functions of the controller checked by a specialist and
have the settings optimised if necessary.
Maintenance
Z.3. Maintenance
Performing maintenance:
- Check the date and time (see „7.4. - Time and Date“ on page 40 )
- Assess/check plausibility of analyses (see „2. - Statistics“ on page 23)
- Check the message log (see „2.5. - Message log“ on page 23)
- Verify/check plausibility of the current measurement values
(see „1. - Measurement values“ on page 22)
- Check the switch outputs/consumers in manual mode (see „4.2. - Manual“ on page 25)
- If necessary: Optimise the parameter settings