Need help?Do you have a question about the Sorel STDC V3 and is the answer not in the manual?
Essential to read for safety, installation, commissioning, maintenance, and optimal use.
Lists technical specifications like voltage, frequency, fuse, protection category, and output types.
Provides step-by-step instructions for mounting the controller on a wall.
Details safety precautions and procedures for connecting the unit's electrical wiring.
Explains how to correctly position and connect temperature sensors for accurate measurements.
Shows wiring diagrams for connecting the controller to a solar system with a storage tank.
Shows wiring diagrams for connecting the controller to a solar system with a swimming pool.
Provides terminal connection diagrams for a solid fuel boiler with a storage tank system.
Shows terminal connection diagrams for a storage transfer system.
Displays terminal connection diagrams for a heating circuit raising system.
Shows terminal connection diagrams for a thermostat-controlled system.
Provides terminal connection diagrams for a universal delta T controller setup.
Shows terminal connection diagrams for a system involving a stop valve.
Displays terminal connection diagrams for a solar system with heat exchanger and pool.
Details the setup wizard and basic parameter settings for the controller.
Introduces the menu for basic control function settings and general parameter descriptions.
Sets the minimum temperature for sensor 1 to enable/start the pump or valve.
Configures the temperature difference threshold for relay R1 to switch the pump/valve on or off.
Sets the reference temperature for thermostat control (heating or cooling).
Sets the maximum temperature for sensor 1 to switch off the pump or valve.
Sets the maximum temperature for sensor 3 to switch off the relay.
Configures specific output signal parameters for PWM and 0-10V pump control.
General| Brand | Sorel |
|---|---|
| Model | STDC V3 |
| Category | Temperature Controller |
| Language | English |
To Next Page
