SoundCraft Signature 22 User Manual

16, 22, 22MTK User Manual
8.2: REVERBS
LEXICON FX > REVERBS
8.2: REVERBS
GATED
A gated reverb uses a threshold setting to abruptly cut o the reverberant field, producing a distinctive eect
often used on pop percussion.
Parameter 1: Liveliness
Parameter 2: Decay Time
SPRING
A Spring reverb is created by a pair of piezoelectric crystals — one acting as a speaker and the other acting as a
microphone — connected by a simple set of springs. The characteristic ‘boing’ of a spring is an important
component of many classic rock and rockabilly guitar sounds.
Parameter 1: Liveliness
Parameter 2: Decay Time
HALL & CHORUS
A hall reverb combined with chorus eect to thicken up the reverberant field.
Parameter 1: Decay Time
Parameter 2: Modulation Speed
PLATE & CHORUS
A plate reverb combined with chorus eect to thicken up the reverberant field.
Parameter 1: Decay Time
Parameter 2: Modulation Speed
HALL & DELAY
A hall reverb combined with a delay eect.
Parameter 1: Decay Time
Parameter 2: Delay Time
PLATE & DELAY
A plate reverb combined with a delay eect.
Parameter 1: Decay Time
Parameter 2: Delay Time

SoundCraft Signature 22 Specifications

General

Channels	22
Faders	100mm
Type	Analog Mixer
Inputs - Mic Preamps	16 x XLR
Computer Connectivity	USB
Phantom Power	Yes
Subgroups	4
Mic Preamps	16
EQ Bands	3-band
Effects	Lexicon Effects Engine
Inputs - Line	22 x 1/4"
Inputs - Other	2 x RCA (Stereo)
Outputs - Main	2 x XLR
Outputs - Other	1 x 1/4" (Headphones)
Aux Sends	5 Aux Sends