Soundoff Signal MPower EMPS2QM - User Manual

4" & 3" MPOWER
®
FASCIA LIGHTS
ENGLISH 0000JL 1223 REV C
1.800.338.7337 / www.soundoffsignal.com
FASCIA LIGHTS - 4"
EMPS2QM(x)(xxx) - QUICK MOUNT
EMPS2SMS(x)(xxx) - SCREW MOUNT
EMPS2STS(x)(xxx) - STUD MOUNT THREADED
FASCIA LIGHTS - 3"
EMPS1QM(x)(xxx) - QUICK MOUNT
EMPS1SMS(x)(xxx) - SCREW MOUNT
EMPS1STS(x)(xxx) - FORD GRILLE MOUNT
EMPS1SLS(x)(xxx)- STUD MOUNT THREADED
• HIGH CURRENT interconnects must be properly terminated. Poor crimp
quality can cause heat build-up and fire. Follow the crimp connector
manufacturer instructions.
• DO NOT install this product or route any wires in the Air Bag Deployment
Zone. Refer to vehicle Owner’s Manual for deployment zones.
• Do NOT use system to disconnect headlights, brake lights or other safety
equipment.
• Unit may become hot to touch during normal operation.
• Failure to properly install connectors, fuses or wiring may cause vehicle
failure or fire.
• Installation must only be performed by trained technician. Installer must
determine vehicle wiring configuration and proper integration of system.
• Use proper wire gauge. All power wires connecting to positive (+) or
negative (-) battery terminal or local chassis ground (-) must be sized to
supply at least 125% of max. current and properly fused at power source.
• Install protective grommets when routing wire through firewall or metal.
• Petroleum/silicone based lubricants will cause the silicone lens to discolor.
NOTICE:
Installers and users must comply with all applicable federal, state and local laws regarding use and installation of warning
devices. Improper use or installation may void warranty coverage. To review our Limited Warranty Statement & Return Policy
for this or any SoundOff Signal product, visit our website at www.soundoffsignal.com/tech-services/returns/. If you have
questions regarding this product, contact Technical Services, Monday - Friday, 8 a.m. to 5 p.m. ET at 1.800.338.7337 (press
#4). Questions or comments that do not require immediate attention may be emailed to techservices@soundoffsignal.com.
ENHANCING SAFETY THROUGH INNOVATION
Scan for the latest version
of the instruction sheet.
WARNING
!
ROUTE WIRES ONLY IN LOCATIONS THAT ARE NOT SUBJECTED TO
POTENTIAL WEAR. MAKE SURE TO AVOID ROUTING WIRES IN THE
DEPLOYMENT AREA OF YOUR AIR BAG. REFER TO YOUR VEHICLE'S
OWNER'S MANUAL FOR AIRBAG DEPLOYMENT ZONES.
WARNING
Protected by U.S. Patent 10,703,260 and Patents Pending
https://soundoffsignal.com/legal/patent-notification/
4" DIMENSIONS / TECHNICAL SPECIFICATIONS . . . 2
3" DIMENSIONS / TECHNICAL SPECIFICATIONS . . . 3
QUICK / STUD MOUNT INSTALL . . . . . . . . . . . . . . . . . . 4
SCREW / EDGE MOUNT INSTALL . . . . . . . . . . . . . . 5
MULTI-MOUNT / BACK PLATE MOUNT INSTALL . . . 6
4" HOLE TEMPLATE INFORMATION . . . . . . . . . . . . 7
4" HOLE TEMPLATE INFORMATION . . . . . . . . . . . . 8
ELECTRICAL INSTALLATION / INFORMATION . . . 9 - 12

Summary

4 Dimensions; Technical Specifications

4 mpower DIMENSIONS; SPECIFICATIONS

Details the physical dimensions and technical specifications for the 4-inch fascia lights, including wire hook-up.

3 Dimensions; Technical Specifications

3 mpower DIMENSIONS; SPECIFICATIONS

Details the physical dimensions and technical specifications for the 3-inch fascia lights, including wire hook-up.

Quick; Stud Mount Install

Quick Mount Installation

Step-by-step guide for installing the fascia lights using the quick mount method.

Stud Mount Installation

Step-by-step guide for installing the fascia lights using the stud mount method.

Screw; Edge Mount Install

Screw Mount Installation

Instructions for installing the fascia lights using the screw mount method.

Edge Mount Installation

Instructions for installing the fascia lights using the edge mount bracket.

Multi-Mount; Back Plate Mount Install

Multi-Mount Installation

Guide for installing the fascia lights using the multi-mount bracket system.

Grille Mount Backplate Installation

Guide for installing the fascia lights using the grille mount backplate.

4 Hole Template Information

4 Screw Mount Hole Template

Drilling template for the 4-inch fascia light screw mount installation.

4 Stud Mount Hole Template

Drilling template for the 4-inch fascia light stud mount installation.

4 Multi-Mount Hole Template

Drilling template for the 4-inch fascia light multi-mount installation.

4 Hole Template Information

3 Screw Mount Hole Template

Drilling template for the 3-inch fascia light screw mount installation.

3 Stud Mount Hole Template

Drilling template for the 3-inch fascia light stud mount installation.

3 Ford Grille Mount Hole Template

Drilling template for the 3-inch fascia light Ford grille mount installation.

3 Multi-Mount Hole Template

Drilling template for the 3-inch fascia light multi-mount installation.

Electrical Installation; Information

Over-Voltage and Thermal Protection

Explains over-voltage warning and thermal compensation features of the LED module.

Sync 2 and Flash Patterns

Details synchronized flashing and the available flash patterns for the lights.

Function Table Operation

Instructions on using function tables to change light modes and settings.

Advanced Electrical Functions

Covers color swap, pattern advance, backup, reset, and lockout configuration.

Remote Mode and Cruise;Low Power

Explains remote mode functionality and cruise/low power input requirements.

Warranty & Return Goods Procedure

Warranty Return Process

Outlines the steps and information required for product warranty returns.

Warranty Exclusions and Forfeiture

Details conditions that will void the product's warranty coverage.

Soundoff Signal MPower EMPS2QM Specifications

General

Voltage	12-24 VDC
Light Source	LED
Ingress Protection	IP67
Type	Warning Light
Color	Amber, Blue, Red, White
Certifications	SAE J845
Flash Patterns	Multiple
Operating Temperature	-40°F to +158°F (-40°C to +70°C)