-----------------.~~
~
~
~
With this option you can select the preferred language
for
the audio output. When the selected
language is recorded on the disc (not all discs have multiple languages recorded) then this
language will automatically be played.
If
not, the first language recorded on the disc is displayed.
[3].
DVD Menu Lang setting:
With this option you can select the preferred language for the disc menu. When the selected
language is recorded on the disc then this language will automatically be selected.
If
not, the first
language recorded on the disc is displayed.
[4]PASSWORD:
The password for this unit is initially set to factory default
0000. If
you want to change your
password, you need
to enter the old password first and confirm it, and enter a new password and
confirm.
WARNING:
if
you forget your password, there is no possibility to reset the password
again. Do not forget your mask and write it down
or
store the mask
in
a safe place.
[5]
Rating
I
PARENTAL SETUP.
For DVD discs which support the
USA
rating system, setting up rating control can prevent
children from watching content that might not be suitable for their age. You are asked to enter the
password when you change the rating setting. The default password is
0000.
Code Description
1.NONE
Kid safe
2.G
General
Audiences-
ALL
ages admitted
3.PG
PARENTAL
GUIDANCE SUGGESTED-Some material may not be suitable for
children
4.PG-13
PARENTS
STRONGLY
CAUTIONED-Some
material may be inappropriate
for children under 13
S.PG-R Restricted, under 17 requires accompanying parent
or
adult guardian.
6.R
RESTRICTED-Under
17 requires accompanying_ parent
or
adult guardian
7.NC-17 NO ONE
17 AND UNDER
ADMITTED
8.
Adult
Above 17 Admitted
[6]
TV
TYPE:
Set
TFT
screen mode to the correct ratio:
Three screen ratio modes are available,
Normai/PS
(4:3 Pan Scan), Normai/LB (4:3 Letterbox)
and Wide (16:9). Different disc formats will display different images depending this setting and
the screen size used.
[7]
NTSC/ PAL:
Select this menu item to set up your preferred video output format. PAL is commonly used in
Europe,
NTSC
is commonly used in the
USA
and Japan.
[8]
DEFAULT:
Factory reset.
Set all values to Factory default values including memory and preset stations
14
To Next Page
Loading...
