1.
Connect TV antenna, and then press MODE button to select
TV
mode.
2.
In
TV
mode, press the Play/pause button once to enter
TV
menu setting.
3.
Press
thet/•
buttons on the remote control or turning the knob clockwise or counterclockwise
on front panel to select one
of
the setup pages: Auto program => Manual program.
4. Press VOL button on front panel or ENTER button on remote control to enter the page.
5.
Press
thet/•
buttons to select the setting.
6.
Press VOL button on front panel or ENTER button on remote control again to confirm, press
Play/pause to return to settings list.
TV
MENU
Press the MEM button to enter the setup menu
of
TV.
Auto
program
{Auto
seek mode)
• System
Select the menu item is to set TV system: NTSC=>PAL=>SECAM, press ENTER button on
remote.
•
Audio
Select this menu item is to set the TV sound system:
1) When system setting PAL, TV sound system can set 8/G=>I=>D/K=>/M/N, press ENTER on
remote.
2) When system setting SECAM, TV sound system can set 8/G=>I=>D/K, press ENTER on
remote.
3) When system setting NTSC, M/N sound system can be selected only.
• Search
Select this menu item is to start searching and storing stations automatically.
Manual
program
{manual seek mode)
Storage
Select this menu item is to set the storage number.
• System
Select this menu item is to set
TV
system: SECAM => NTSC =>PAL, press NTER button on the
remote control to select.
•
Audio
Select this menu item is to set the TV sound system:
1) When system settings PAL, press ENTER on remote
or
tap the screen button to select
TV
sound system: 0/K=>M/N=> 8/G=>
I.
2) When system setting SECAM, TV sound system 8/G=>I=>D/K.
3) When system setting NTSC, M/N sound system can be selected only.
Channel
Select this menu item is to set your desired searching channel, press •t• button on the RC to
select one, or press
~~~
I
....
1 icon to select channel.
• Fine
Select this menu item is to fine TV tuning and sound until it achieves the best quality, press •t•
button on remote to adjust.
•
Memory
Select memory on or off is to set whether memory the searched station or not, press
ENTER on remote control to select.
19
To Next Page
Loading...
