4.
Press the ENTER button on remote or tap
"Auto
program
or
Manual program"
on screen to
enter the page.
5.
Press the
tl•
on remote buttons
or
tap relevant option to select the setting.
6.
Press ENTER on the remote again to confirm, tap BACK
to return to the setup page.
7.
Press the
6/
\!Icon
to adjust TFT angle.
8.
Press the
¢=J
icon to be back to main menu.
Note: This function is available when
TV
tuner is connected.
TV
MENU
Auto
program
(Auto
seek
mode)
•
System
Select this menu item is to set
TV
system: NTSC=>PAL=>SECAM, press ENTER button on
remote
or
tap the screen to select.
•
Audio
Select this menu item is to set the TV sound system:
When system setting PAL, TV sound system can set
BIG=>I=>DIK=>IMIN,
press ENTER on
remote or tap the screen button to select.
When system setting SECAM,
TV
sound system can set
BIG=>I=>DIK, press ENTER on
remote or tap the screen button to select.
When system setting
NTSC, press • button to automatic skip search term.
• Search
Select this menu item is to start searching and storing stations automatically.
Manual
program
(manual seek
mode)
•
Storage
Select this menu item is to set the storage number.
•
System
Select this menu item is to set TV system:
SECAM =>
NTSC
=>PAL , press NTER button on
the remote or tap the screen to select.
•
Audio
Select this menu item is to set the TV sound system:
when system setting PAL, press ENTER on remote or tap the screen button to select TV sound
system: DIK=>MIN=> 8/G=>
I.
When system setting SECAM, TV sound system
BIG=>I=>DIK.
When system setting
NTSC,
press • button to automatic skip
TV
channel term
..
,
Channel
Select this menu item is to set your desired searching channel, press
•I•
button on remote to
select one,
or
press
~~~
I
~~I
icon to select channel.
•
Fine
Select this menu item is to fine TV tuning and sound until it achieves the best quality, press
•I
•
button on remote to adjust.
•
Memory
Select memory on
or
off is to set whether memory the searched station or not, press ENTER on
remote or tap the screen button to select.
21