21
User Setup - Runtimes
To view, set, or reset System Runtimes, press the SETUP button,
then press MODE. Press MODE to advance to the desired setup step.
Use the WARMER or COOLER buttons to adjust the value of your
selection. Press SETUP again to leave the setup screens.
UV Lamp Runtime (setup steps 11, 14)
Current UV Lamp Calendar Days (Setup Step 11) -
This counter displays the total number of calendar days
that have elapsed to help the user track UV lamp runtime.
Press FAN to reset.
Set UV Lamp Calendar Days (Setup Step 14) - This timer
allows the user to specify the number of calendar days the
UV Lamp will operate before the “Replace UV Lamp”alert
will be displayed. Press COOLER continuously until
0 appears to disable this alert.
To Next Page
Loading...
