Version: 1
Revision Date: 02/2018
N
2-BLAST
®
FPS-500
O&M Manual
Page: 5 of 25
Contact us Toll-Free: (888) 526-6284
INTRODUCTION
1.1 GENERAL PURPOSE
This manual provides proper installation and use of South-Tek Systems N2-BLAST
®
FPS-500.
South-Tek Systems is not responsible for damages when using this in manners not approved by
South-Tek Systems. The user(s) of this document should confer any questions with a qualied
South-Tek Systems representative on its commissioning and correct use.
Please contact South-Tek Systems with any question or concerns at:
South-Tek Systems, LLC
2940 Orville Wright Way Ste 600
Wilmington, NC, 28405
Tel: (888) 526-6284
Email: Info@southteksystems.com
http://www.southteksystems.com/
This document is based upon the R&D performed by the South-Tek Systems Engineering Team.
WARNING: Read the manual in its entirety before installing or using the equipment.
1.2 ABOUT SOUTH-TEK SYSTEMS
South-Tek Systems, founded in 1997, is a nitrogen generator manufacturer designing nitrogen
generators for worldwide distribution. Why not produce nitrogen at your facility for a fraction of
the cost versus endlessly paying for bulk liquid or delivered gas cylinders? We make a full line of
nitrogen generator including:
•
The N2 GEN
®
Series Nitrogen generators for use in various industrial and lab applications.
50,000 SCFH unit.
•
The BeerBlast™ - Mixed Gas Dispense System Increases prots, removes over or under
carbonation, and improves all-around taste and draft beer quality.
•
The
N2-BLAST
®
- Corrosion Inhibiting System effectively arrests electrochemical, galvanic
and micro-biologically influenced corrosion (MIC) by introducing 99.9995% pure nitrogen
into dry and pre-action sprinkler systems.
With purities ranging from 95% up to 99.999%, we provide nitrogen generators that are sure to suit
your needs. For more information about our complete nitrogen generator capabilities, please visit
our website at www.southteksystems.com.
1
To Next Page
Loading...
