South-Tek Systems N2-BLAST FPS-500 User Manual

Version: 1
Revision Date: 02/2018
N
2-BLAST
®
FPS-500
O&M Manual
Page: 6 of 25
Contact us Toll-Free: (888) 526-6284
1.3 AUDIENCE
This manual is for Installer/Supervisory Staff. Read the entire manual before operating. Please
contact the local provider for any operation and maintenance questions before contacting the
manufacturer .
1.4 IMPORTANT INFORMATION
All personnel (and their supervisors) installing, operating, and maintaining the N
2-BLAST
®
must
read and fully understand this manual prior to installing, operating or performing maintenance.
The N
2-BLAST
®
produces nitrogen (N2) at a low flow rate, which quickly dissipates into the air. N2
gas is not poisonous, but do not directly inhale, since high concentrations can cause asphyxiation.
Install the unit in a well-ventilated room that is not sealed off from normal living space air changes.
All personnel involved with the installation, operations, and maintenance of the N2-BLAST
®
must
follow safe working practices, including OHSA and local health/safety code regulations.
1.5 LIMITS OF LIABILITY
Buyer’s exclusive remedy for all claims shall be for damages, and seller’s total liability for any and
all losses and damages arising out of any cause whatsoever including, without limitation, defects
in or defective performance of the system, (whether such claim be based on contract, negligence,
strictly liability, other tort or otherwise) shall in no event exceed the purchase price of the system
in respect of which such cause arises or, at seller’s option, the repair or replacement of such; and
in no event shall seller be liable for incidental, consequential or punitive damages resulting from
any such cause.
Seller shall not be liable for, and Buyer assumes all liability for, the suitability and the results
of using nitrogen by itself or in any manufacturing or other industrial process or procedure, all
personal injury and property damages connected with the possession, operation, maintenance,
other use or resale of the System. Transportation charges for the return of the System shall not
be paid unless authorized in advance by Seller.
NOTE: Any MODIFICATIONS made by the customer, without the written consent of
South-Tek Systems, will void the product’s warranty.
1.6 SERVICE RETURN POLICY
Follow these procedures to return the system when performing site repairs is not possible:
• The owner must get a Return Material Authorization number, which references the model
and serial, from South-Tek Systems. South-Tek Systems will not accept any items for
service or credit without written authorization from South-Tek Systems.
• Return all items within the original packaging material if possible. Package all items for
safe return to South-Tek Systems. South-Tek Systems will not be responsible for damages,
which occur in transit. Damages occurred from failing to adhere to these procedures will be
the customer’s responsibility. Contact South-Tek Systems for a return shipping address.
• Shipping charges must be prepaid on all returns.

South-Tek Systems N2-BLAST FPS-500 Specifications

General

Brand	South-Tek Systems
Model	N2-BLAST FPS-500
Category	Safety Equipment
Language	English