Soyal AR-331-E User Manual

V220922
AR-331-E/EF
SOYAL
ACCESS CONTROL SYSTEM
CN1 CN2
CN4 CN5 CN6
RJ45
AR-331-E AR-331-EF
1
2
3
4
5
6
7
8
9
0
最佳感應區
- 1 -
Contents
1
Product
Security Torx Wrenches
Security Torx: M3x10
Flat Head Cap Philips
Tapping Screw: 4x20
Installation
Peel o󰀨 screw hole rubbers and frame rubber from rubber pad
Put screw rubbers on the back side of the mounting plate and pull
the cables from the square hole of the mounting plate.
Put a frame rubber on the frame groove of body
Connect the terminal cables to the body and attach the body to the
mounting plate.
Assemble the covers with the Allen key and screws (accessories supplied).
Turn on the power and LED will light and beep will sound.
4
Accessories
2
Terminal Cables
3
Tools
Front Panel & Indicator
While power on the device,
hands off the touch panel
for 10 sec. to make sure
a successful activation.
Peel
off
screw
rubber
Peel
off frame
rubber
4
5
1
4
2
3
5
6
7
Screws
Rubber
Frame
Rubber
Put on/Take off together
5
Option
Arming / Blue LED
Input (Active High)
Yellow LED Input
(Active High)
Left LED
Descrption Descrption
Yellow
Blue
Power-on/Stand-by
/OK
Error/Alarm
Right LED
Green
Red
Rubber Pad
TCP/IP
Module
158 mm
55 mm
30 mm
27.5 mm
19 mm 87 mm 22 mm
16.5 mm
27.5 mm
34 mm
14
(Front View) (Side view)
INSTALLATION

Soyal AR-331-E Specifications

General

Model	AR-331-E
Type	IP Access Controller
Baud Rate	9600 bps
Event Log	Yes
Reader Port	2
Input Port	4
Output Port	4
Operating Voltage	12V DC
Current Consumption	200 mA
Operating Temperature	-10°C to 50°C
Certification	CE, FCC
Main Processor	32-bit
Communication Interface	TCP/IP, RS-485
Relay Output	1

Summary

Installation Guide

Connection Methods

Electric Strike and Door Sensor Connections

Connecting electric strikes and door sensors to the system.

Reader and WG Mode Settings

Connecting readers and configuring WG mode.

Tag Management: Adding and Deleting

Add New Tags

Guide for adding new tags via presentation.

Delete Tags

Procedures for deleting single or multiple tags.

System Programming

Setting up the Control Mode (M4/M8)

Anti-Passback Functionality

Enable Device

Enable Card User

Arming Mode Configuration

Alarm Conditions

Arming Setting and Alarm Trigger Procedure

Fingerprint Management

Adding Fingerprints

Steps to add fingerprint data.

Deleting Fingerprints

Procedures for deleting fingerprint data.

Deleting All Fingerprints

Restoring Factory Settings

Reset User Data

Resetting only user data.

Reset User Data & Controller Parameter

Resetting user data and controller parameters.

Reset User Data & Controller Parameter (incl. Master Code)

Resetting data, parameters, and master code.

Reset IP Setting

Resetting the device's IP configuration.

Firmware Upgrade Procedure

Execute the Software

Update the Firmware

Step-by-step guide for firmware update.

EnrollTool Software Settings

Enroll Fingers

Deleting Fingerprint Database

IP Setting and Network Configuration

Web Interface Access and Navigation

Login and Password Management

Managing user login credentials and passwords.

Network Parameter Configuration

Setting IP address and other network details.

WG Keyboard Command List

Programming Mode Operations

Device Configuration Settings

Security and Access Control Commands

WG Keyboard Command List (Continued)

System Time and User Management Commands

Advanced Access Control Commands

Compound Command Function List