To Next PageTo Next Page
Need help?Do you have a question about the Spa-Quip SP400P and is the answer not in the manual?
General| Brand | Spa-Quip |
|---|---|
| Model | SP400P |
| Category | Controller |
| Language | English |
Explains the function of various indicator LEDs on the touch pad.
How to adjust the spa's set temperature using up/down buttons.
How to check sensed water temperature or set point.
Explains Demand Heating (Ht.d) and Filtration Only Heating (Ht.F).
Operation of single-speed pump without 24hr circulation.
Operation of single-speed pump with 24hr circulation.
Operation of two-speed pump without 24hr circulation.
Operation of two-speed pump with 24hr circulation.
Controls for standard air blower (ON/OFF).
Controls for variable-speed blower (modes, speed).
How to adjust blower speed in SPVSB mode.
Controls for spa light functions (ON/OFF, modes, temperature adjustment).
How to set the colour for variable colour lights.
Indicates when the spa light is on; auto switch-off.
Maintains filtration time by running pump if needed.
How to set minimum filtration time per hour.
Initiates a 90-minute water filtration cycle.
Continuous filtration with a silent, energy-efficient pump.
Advice on managing high spa temperatures during summer.
Step-by-step guide to setting the current time and day.
Guide to programming sleep and wake times.
Indicates no water detected in the heater housing; recovery steps.
Detects a touchpad button stuck or held down.
Indicates a problem with the optical water sensor in the heater.
Detects a temperature of 45°C or more.
Indicates the safety thermal cut out on the heater has operated.
Indicates a problem with the heater control circuitry.
Indicates a problem with the digital temperature sensor.
