Page 6
When the light is on, short presses of the Down button will put the light into adjustable colour mode
and then sequentially select through all the available colours. The last colour set in this mode will be
remembered the next time the light is used.
5 Light Operation
The multi-function Light Button is used to turn the light on and off (SPCL) and select through the
different operating modes of the Spa Power Variable Colour Light. Two short presses of the button will turn
the Spa Power Coloured Light on and off or five short presses of the button will cycle the Spa Power
Variable Coloured Light as follows:
Push 1 - Light ON
Push 2 - Light ADJUST
Push 3 - Light CYCLE SLOW
Push 4 - Light CYCLE FAST
Push 5 - Light OFF
(SPCL - On) (SPVCL Colour - White)
(SPCL - Off) (SPVCL Adjustable Colour Mode)
(SPVCL Cycle through colours - slowly)
(SPVCL Cycle through colours - quickly)
(Default State)
Light Button
5.2 Indicator Light
ON
A small red dot in the bottom corner of the digital readout indicates when the
light is turned on. If left on the light will automatically switch off after 30
minutes.
Note: This is a multi-function button which performs the following -
1) Short presses of this button activate the light functions as detailed above.
2) Holding this button will begin toincrease the set temperature ofthe spa.
3) When a SpaPower Variable Speed Blower is fitted and is turned on this button increases the blower speed.
5.1 Adjustable Colour Mode (SPVCL only)
Your spa may have been fitted with either of two different LED lights; a Spa Power Coloured Light
(SPCL) or a Spa power Variable Coloured Light (SPVCL). The Spa Power Coloured Light is a single
coloured light that is either on or off. The Spa Power Variable Coloured light is a light that has the
ability to change between 12 different colours and white (see below for user instructions).
To Next Page
Loading...
Need help?
General
