1. Verify power switches are in the OFF posion.
2. Use the large brush and cool water to thoroughly
clean inside the cylinder; be sure to scrub the back of
the cylinder
.
3. Thoroughly clean and dry the rear of the cylinder
with a clean, dry towel.
4. Gently clean and wipe down the outside of the
machine.
5. Carefully and thoroughly wash all parts removed
from the machine using supplied brushes, sponges,
and clean towels;
if machine has air pumps, be sure to include all air
pump parts in cleaning.
6. When cleaning the dispensing door assembly, clean
the priming ports with a small brush.
7. Carefully and thoroughly clean all gaskets and
O-rings removed from the machine; be sure to wipe
gaskets and O-rings to remove excess lubricant.
8. Verify all parts are clean prior to re-assembling
machine.
Never wash parts in a dishwasher. Always hand-wash components with nontoxic,
food-safe cleaners.
To Next Page
Loading...
