Spaceman requires that only the specied refrigerant be used
in your machine.
Alternave refrigerants may cause damage to the cooling
system and/or prevent the machine from operang at opmal
performance.
If you require an alternave refrigerant, please call Spaceman
Technical Support for a list of compable alternaves for your
compressor.
• Place on a at, level, and solid surface ed to
the machine dimensions
• Ensure a minimum 152mm (6'') clearance on
the exhaust side (Side or Back)
• Completely clear area of dust, grease, and
airborne parcles
• Place away from hot equipment such as stoves,
frying baskets, ovens, etc.
Failure to comply will damage the machine and refrigeraon components and will void all
warranes.
Operang in higher ambient temperatures will result in degraded performance.
1. Connect all wires to Circuit Breaker (including neutral & ground bus
terminals) or Local Plug according to supply voltage and wire codes on
machine power cable.
2. Verify Incoming Supply Cable is wired the same way on Circuit Breaker or
Wall Receptacle before switching on or plugging in the machine.
The image displayed is for illustraon purpose only and may
dier from the actual product.
To Next Page
Loading...