1. Verify power switch is turned to OFF.
2. Use the large brush and cool water to thoroughly clean
inside the cylinder; be sure to scrub the back of the
cylinder and verify the cylinder is free of ALL product.
3. Thoroughly clean and dry the rear of the cylinder with
the supplied black brushes and a clean, dry towel.
4. Gently clean and wipe down the outside of the
machine.
5. Carefully and thoroughly wash all parts removed from
the machine using supplied brushes, sponges, and clean
towels; when cleaning the dispensing door, clean the
priming port with a small brush.
6. Carefully and thoroughly clean all gaskets and
O-rings removed from the machine; be sure to wipe
gaskets and O-rings to remove excess lubricant.
7. Verify all parts are clean and free of all food product
prior to re-assembling machine.
Never wash parts in a dishwasher. Always hand-wash components with nontoxic,
food-safe cleaners.
To Next Page
Loading...