SPALDING 2622007 - Attach Elevator Tubes to Backboard

Assemble the Backboard
20
F
ASSEMBLE THE BACKBOARD
8. Attach the lower and upper elevator tubes (41 and 42) to the back of the backboard using the
spacers (20), bolts (14), and nuts (9).
#9
#9
#42
#41
#20
#20
#14
#14
#20
#9
#14
9. Securely tighten all the bolts from this section.
WARNING
DO NOT LEAVE THE ASSEMBLY UNATTENDED WHEN EMPTY; IT MAY TIP OVER.