SPALDING 2622007 - Backboard Assembly; Attach Elevator Tubes to Pole

Assemble the Backboard
18
Assemble the Backboard
Required Parts: Completed Backboard Assembly:
• Kit 4
• Socket Wrench or Wrench
7mm, 9/16 in, 3/4 in
• Sawhorse
WARNING
TWO PEOPLE ARE REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS
INJURY AND/OR PROPERTY DAMAGE.
F
ASSEMBLE THE BACKBOARD
1. Support the pole on a sawhorse.
2. Identify the lower elevator tube (41) and upper elevator tube (42).
#42
#41