Spanco.com • 1-800-869-2080 •
Spanco
®
A-Series Aluminum Gantry Crane 17
Promise to Perform Industries, Inc.
BEFORE EACH USE A-SERIES ALUMINUM
GANTRY CRANE SYSTEM INSPECTION
CHECKLIST
Inspector Name:
Date:
System Number:
Model:
Inspection Result (
3
)
INSPECTION POINTS PASS FAIL
1. Inspect hoist per manufacturer’s instructions.
2. Verify that the trolley can easily and smoothly roll the full length of the beam.
3. Verify that the caster wheels can easily and smoothly roll along the full length of the surface the gantry operates on.
4. Check all system welds for cracks.
5. Check system components for corrosion.
6. Check system components for bent or damaged areas.
7. Visually check all bolted assemblies for proper connections and properly secured bolts and nuts.
Caster Inspection
1. Inspect casters for visible signs of damage or excessive wear.
2. Check each caster unit for potentially concealed damage.
3. Visually check that all caster studs are present and tight.
4. Ensure that the caster’s axles are properly secured.
5. Ensure that the casters’ brakes and swivel locks perform properly.
6. Ensure that the caster brakes make contact with the caster material for maximum effectiveness.
©2022. All Rights Reserved. All specifications and product designs subject to change without prior notice.
To Next Page
Loading...