iii Rigid Lifelines
®
Traveling Bridge Anchor Track
™
System | 1-800-869-2080 1-800-869-2080 | Rigid Lifelines
®
Traveling Bridge Anchor Track
™
System 1
iii Spanco
®
A-Series Aluminum Gantry Crane
• 1-800-869-2080 • Spanco.com
SYSTEM APPLICATIONS
The Spanco System is used for material handling applications. This material handling system is labeled with a maximum rated
capacity and is designated for Class C service as defined by the CMAA; follow all limitations as noted on system labels.
STANDARDS AND COMPLIANCE
Please refer to local, state, and federal (OSHA) requirements governing occupational safety for additional information
regarding material handling. The Spanco system meets or exceeds the requirements set forth in OSHA 1910.179, ANSI
B30.11, and MMA MH27.2 or CMAA 70.
REQUIRED TRAINING
This system is intended to be used by people who are trained in its correct application and use. It is the responsibility of the
users and the users’ management to ensure that they are familiar with OSHA law and these instructions, and that they are
trained in the correct use and care of this equipment. Authorized users must also be aware of the operating characteristics,
application limits, and the consequences of improper use, which can result in serious injury or death. All users must read and
understand CMAA 79 Crane Operator’s Manual.
Every material handling application must be OSHA compliant. Safety and training measures may include, but are not limited
to:
• Operator certification training
• Operator evaluation program
• Hand signal protocols if required
• Lock-out/Tag-out training
The above list is not a comprehensive list. Specific applications may need to include additional protocols. For more information
on how to create a comprehensive lift plan within your facility, follow CMAA 79
Crane Operator’s Manual.
Follow the Inspection Checklists in this manual: review the Before Each Use Inspection Checklist on page 17 before each
use and review the Annual Inspection Checklist on page 18 annually.