16
KEY COMPONENT DATA
RACKS & FENDERS
FENDERS
• Specialized DryTech with “Flextender Extensions”
for best protection
•
Watch video to see how well they work - this is a real rider
• 65 mm outer width
• Rear fender connected to rack
• Rear light cable runs in integrated fender channel
REAR RACK
• Custom Specialized pannier rack, aluminum
• Rack is connected to rear fender
• Max. 20 kg load
• Compatible with all standard panniers (pannier rail
diameter: 10 mm)
• Panniers are supported by two rack stays, so that
they do not get into the spokes
• Panniers cannot rub against frame (rack creates
space between rear end and pannier backside)
• Each horizontal rail features and adjustable pannier
stopper to prevent pannier from sliding
• Compatible with pannier hooks
FRONT RACK & BASKET
• Max. 15 kg load
• Plastic basket with hook-on cargo net
• Ships with all models
• Basket is screwed to base-plate with 4 screws
(4 dedicated holes)
• Net dimensions: approx. 20x24 cm; 5x6 cm mesh opening
• The net can be used with the rack base-plate alone, but you
need to make sure the net is properly tensioned by the
items you transport
• Base plate is slotted to mount custom solutions
• Base plate dimensions: approx. 34 cm wide and
25 cm deep (at center)
• Variety of baskets, boxes, crates, etc. can be mounted
• (Abus) folding locks are especially suitable to be
mounted (lock holder can be bolted on)
• To consider for front rack removal
• Front light needs to be mounted to fork with suitable
bracket, for instance the Supernova Multimount S
To Next Page
Loading...
