32
GUIDELINES & TIPS
RIDINGTIPS(SL-SPECIFIC)
GUIDELINES & TIPS
CLEANING GUIDELINE
BENEFIT
Rewards rider best motor support over ride, reduces load on
batteries, esp. on RE (potentially increases lifetime).
‘Tune’ menu allows customizing/controlling
motor performance and range.
Limits drivetrain wear.
Gives rider optimal motor support and ensures best
cadences, also beyond 100 rpm.
Rider can control cadence, mode and state of
charge based on numbers.
RIDE TIP
When using a Range Extender, ride in default parallel
discharge mode.
Use Mission Control App to customize SL system.
Relieve pedalling force shortly before/during shifting.
Pedal in a smooth cadence spectrum
(rule of thumb: 75 rpm and higher).
Use TCD to monitor important metrics.
Please educate all your customers/riders on how to clean their
Como SL appropriately. This helps avoid issues.
The Como SL User Manual also holds some cleaning tips.
CLEANING TIPS
• Never use a high-pressure cleaner to clean your Como SL
(use a wet cloth or a low-pressure garden hose for
removing dirt)
• Always turn off the bike before cleaning
• Remove the Range Extender Battery before cleaning
(if needed, clean separately with a wet cloth; remove dirt
from connectors with a soft brush or low-pressure air)
• Inspect the RE / charge port for dirt accumulation
(to clean inside, use soft brush or low-pressure air)
• Before connecting the charger or Range Extender battery,
make sure all contacts and ports are dry and clean
• Clean the Speed Sensor magnet on the rear wheel with a
cloth (brake dust with metal parts can collect and cause
issues in the worst case)
• Pay special attention to chain maintenance after cleaning
Ask your market contacts for printable PDF Maintenance &
Cleaning Checklist (applies to all Turbo bikes).
To Next Page
Loading...
