Why does my Specim Digital Camera shut down unexpectedly?
If your Specim Digital Camera shuts down unexpectedly, it might be due to the operating temperature being too high. Disconnect the power cord and allow the camera to cool down before attempting to power it up again. If the issue persists, consider adding cooling to prevent repeated temperature increases.
How to improve poor image quality on Specim Digital Camera?
If the image quality from your Specim Digital Camera is poor, it could be due to insufficient illumination. You can resolve this by adding more lighting or lengthening the integration time.
What to do if Specim Digital Camera data is not stored to PC?
If the Specim Digital Camera doesn't store data to your PC, it's possible that the save folder hasn't been specified. To fix this, define the save folder within LUMO.
How to fix a Specim Digital Camera that does not start and the LED is blinking?
If your Specim Digital Camera does not start and the LED is blinking, it may be experiencing a boot loop. To resolve this, remove the camera's power cord from the wall socket, wait for a few minutes, and then reconnect the power.
What to do if Specim Digital Camera has no signal to data acquisition PC?
If there is no signal to the data acquisition PC from your Specim Digital Camera, the lens may be covered. Remove the lens cap.
General| Brand | Specim |
|---|---|
| Model | FX17 |
| Category | Digital Camera |
| Language | English |
To Next Page
