| Description | 6
Description
Overview
FX17 camera is built around the monochrome InGaAs image sensor. It is designed for standard applications in
industrial and laboratory use. FX17 works in a push-broom mode, and collects hyperspectral data in the NIR (950 to
1700 nm) region through single fore optics.
There are two versions of the FX17 camera:
• FX17 with Camera Link interface
• FX17e with GigE interface
These specifications apply to all FX17 camera versions.
Figure 1: FX17 Spectral Camera
Camera data path
A diagram of the camera data path is shown in the figure below.
Figure 2: Camera data path
Feature Overview
Feature Characteristics
Image sensor CMOS
Operating range 950 to 1700 nm
Image correction
• Offset and hot pixel correction
All rights reserved - Specim, Spectral Imaging Oy Ltd.
To Next Page
Loading...